Total Memory
This parameter specifies the total amount of on-board memory. The memory
size is automatically detected by BIOS during the POST (Power-On Self Test).
If you install additional memory, the system automatically adjusts this parameter
to display the new memory size.
1st Bank
This parameter indicates the type of DRAM installed in the DIMM 1 socket. The
None setting indicates that there is no DRAM installed.
2nd Bank
This parameter indicates the type of DRAM installed in the DIMM 2 socket. The
None setting indicates that there is no DRAM installed.
Serial Port
This parameter shows the serial port address and IRQ settings.
Parallel Port
This parameter shows the parallel port address and IRQ settings.
26
System Utilities