Setting The Oven Controls - Kenmore Slide-in models Use & Care Manual

Electric range slide-in models
Table of Contents

Advertisement

Available languages

Available languages

Before Setting Oven Controls
Air Circulation in the Oven
For best air circulation and baking results allow 2-4» (5-10 cm) around
the cookware for proper air circulation and be sure pans and cookware
do not touch each other, the oven door, sides or back of the oven cavity.
The hot air must circulate around the pans and cookware in the oven
for even heat to reach around the food.
Setting Oven Controls
Control Pad Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
NOTE: To activate the touch control, you just have to touch the pad with a finger. Take care to have a good contact be-
tween the finger and the touch pad. Long nails can make the activation difficult. It is a good idea to clean the control
panel after each use or as soon as possible after a spill, boil over or spatter because some ionic or salty ingredients as
ketchup, tomatoes sauce, etc. can operate the control. Before cleaning the control panel it is recommended to turn on
the control lockout feature.
CLOCK SET
COOK TIME
PAD— Used
PAD— Used to
to set the
enter the length of
time of day.
the baking time.
OVEN INTERIOR
LIGHT PAD—
Used to turn oven
interior light ON or
OFF.
SELECT SELF-
CLEAN PAD—
Used to select the
Select Clean
Self-Cleaning cycle.
Nettoyage
A 2, 3 or 4 hour Self-
Clean time may be
selected.
DELAY START PAD—
TIMER SET/OFF PAD—
Used to set or cancel the
Used to set the desired
minute timer. The minute
start time for baking &
timer does not start or
Self-Clean. May be used
with COOK TIME to
stop cooking. Also,
TIMER SET/OFF
program a delayed bake
pad is used to set the
or clean cycle.
Continuous Bake feature.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
Note: The time of day must first be set in order to operate the oven.
UP and DOWN ARROW PADS— Used along
with the function pads to select oven temperature,
cook time, start time (when programming an
automatic start time), time of day, clean time
and minute timer.
Cook Time
Temps de
Cuisson
Timer
Delay Start
Minuterie
Départ
On/Off
Différé
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN"
light will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-Clean
cycle or the oven door lockout is activated. The indicator light will
glow constantly after the door locks.
BAKE
PAD—Used to
select the bake
function.
Oven
Four
Preheat
Préchauffage
Door Locked
Porte Verrouillée
11
1 Oven Rack
Multiple Oven Racks
FEATURE
INDICATOR
BROIL PAD—
LIGHTS— These
Used to select
light to show
the variable broil
which feature is
function.
in use.
WARM & HOLD
Bake
Broil
PAD— Used to set
Cuire
Griller
the Warm & Hold
feature.
Hold
STOP
Warm &
Garder
Chaud
ARRÊT
Oven Lock
STOP/CLEAR
3
Verrou Four
PAD— Used to
clear any function
previously entered
except the time of
day and minute timer.
Press STOP/CLEAR
to stop cooking. Also
the STOP/CLEAR
pad is used to
activate oven lockout
setting.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents