Channel Level - Pioneer DV-565A Operating Instructions Manual

09 Initial Settings menu
• Surround left/right (LS/RS) speakers can
be set from –4.5 m to 0 m relative to the
front left/right speakers.
Press  (cursor left) to go back to the
4
speaker list if you want to modify another
speaker, or press ENTER to exit the
Speaker Distance screen.

Channel Level

• Default setting: Fix
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
This setting does not affect digital audio
output.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
When set to Fix, the level of each of the 5.1
channel analog outputs is fixed. Choose
Variable if you want to adjust the relative
levels to balance the surround sound better
for your listening room.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speaker
You can set the individual channel levels
between –6dB and +6dB using the test tone
output as a guide to set the correct levels.
Adjust the levels until the output level from all
channels sounds the same from your usual
listening position.
68
En
Audio Output Mode
Fix
Speaker Installation
Variable
Speaker Distance
Channel Level
Auto
0.0dB
L
0.0dB
C
R 0.0dB
0.0dB
RS
0.0dB
LS
0.0dB
SW
Automatic: Select Auto to start the test tone
output.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language 0.0dB
C
R 0.0dB
Display
0.0dB
RS
Options
0.0dB
LS
Speakers
SW 0.0dB
As the test tone plays through each speaker in
turn, it is highlighted on-screen. Use the /
(cursor up/down) buttons to adjust the
channel output level of the current speaker.
Note that the test tone is not output from the
subwoofer. Press  (cursor left) to exit the
test tone sequence, or ENTER to save the
settings and exit the channel level setting
screen.
Manual: Use the / (cursor up/down)
buttons to select a speaker.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language 0.0dB
C
R 0.0dB
Display
0.0dB
RS
Options
0.0dB
LS
Speaker
SW 0.0dB
Press  (cursor right) then use the /
(cursor up/down) buttons to set the channel
output level.
Initial Settings
Auto
Digital Audio Out
Video Output
L 0.0dB
Language
C 0.0dB
0.0dB
Display R
0.0dB
RS
Options
LS 0.0dB
Speaker
0.0dB
SW