Channel Level - Pioneer DV-757AI Operating Instructions Manual

06 The Audio Settings Menu
3 Press ENTER to make the setting and
exit the Audio Settings screen.
• You can also use the SURROUND
button on the remote control to switch
Virtual Surround on (2V/
TruSurround)/Off.
• Virtual Surround does not work with CD,
MP3, DVD-Audio or SACD discs, or
96kHz Linear PCM soundtracks.
• The Virtual Surround effect is output
only through the analog AUDIO OUT
(2ch) jacks.
• Make sure that Audio Output Mode is
set to 2 Channel (page 67).
• How good the surround effect is varies
with the disc.
52
En

Channel Level

• Default setting: Fix
This setting allows you to set the level of
each channel sent to the 5.1 channel analog
outputs.
1 Press SETUP and select 'Audio Set-
tings' from the on-screen display.
2 Highlight Channel Level, then use the
Joystick (left/right) to change to 'Fix' or
'Variable', as required.
Audio Settings
Audio DRC
Legato PRO
Hi-Bit
Virtual Surround
Channel Level
• Fix – Channel levels are fixed, but you
can set the speaker distances
• Variable – You can specify variable
channel levels as well as speaker
distances
3 If you chose Variable, use the joystick
(down) to proceed to the next screen.
Audio Settings
Audio DRC
Legato PRO
Hi-Bit
Virtual Surround
Channel Level
1/ 2
Off
Off
On
Off
Fix
1/ 3
Off
Off
On
Off
Variable