Channel Level - Pioneer DV-563A Operating Instructions Manual

07 Audio Settings menu
1 Press HOME MENU and select 'Audio
Settings' from the on-screen display.
Audio Settings
Play Mode
Initial Settings
2 Highlight Virtual Surround, then use
the (cursor left/right) buttons to
change to '2V/SRS TruSurround' or 'Off',
as required.
Audio Settings
Audio DRC
Virtual Surround

Channel Level

3 Press ENTER to make the setting and
exit the Audio Settings screen.
• You can also use the SURROUND button
on the remote control to switch Virtual
Surround on (2V/SRS TruSurround)/
Off.
• Virtual Surround does not work with DTS,
DVD-Audio or SACD discs, or 96kHz
Linear PCM soundtracks.
• If the player is outputting Dolby Digital or
MPEG bitstream audio (in other words, no
conversion to PCM), Virtual Surround has
no effect on the audio from the digital
output. See Digital Audio Out settings on
page 54 for how to set up the digital
output formats.
50
En
HOME MENU
DVD
Video Adjust
Disc Navigator
Setup Navigator
1/ 2 page
Off
Off
Fix
• Make sure that Audio Output Mode is
set to 2 Channel (page 66).
• How good the surround effect is varies
with the disc.
Channel Level
• Default setting: Fix
This setting allows you to set the level of each
channel sent to the 5.1 channel analog
outputs.
1 Press HOME MENU and select 'Audio
Settings' from the on-screen display.
HOME MENU
DVD
Audio Settings
Play Mode
Initial Settings
2 Highlight Channel Level, then use the
buttons (cursor left/right) to change
to 'Fix' or 'Variable', as required.
Audio Settings
Audio DRC
Virtual Surround
Channel Level
• Fix – Channel levels are fixed
• Variable – You can specify variable
channel levels
3 If you chose Variable, press
down) to proceed to the next screen.
Audio Settings
Audio DRC
Virtual Surround
Channel Level
Video Adjust
Disc Navigator
Setup Navigator
1/ 2 page
Off
Off
Fix
(cursor
1/ 3 page
Off
Off
Variable