Table of Contents
Advertisement
Available languages
Available languages
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1) To turn the system on, press the POWER button one time.
2) Press AM/FM buttons for the desired band, AM or FM.
3) Rotate the TUNING control to select the desired radio station.
4) Rotate the VOLUME control to the desired level.
5) When finished listening, press the POWER button again for turning off.
LIGHT
Press LIGHT button one time, light will be on. Press LIGHT button again, light will be off.
ANTENNA INFORMATION
AM - The AM bar antenna is inside the cabinet. If AM reception is
unsatisfactory try repositioning the cabinet slightly until the internal
antenna is pickin up the strongest signal.
FM - The FM wire antenna is located on the back cabinet. If necessa-
ry adjust the position and direction of this antenna until you find the
position that provides the reception.
SPECIFICATION
Frequency range
Power Source
Power Consumption
Antennas
Speaker
Weight (NETTO)
We reserve the right to change technical specifications.
:
AM 530 – 1600KHz
FM 88 – 108MHz
:
AC 230 V / 50 Hz
:
9 W
:
Built-in Ferrite Bar forAM
External Antenna for FM
:
3.5 Dynamic type x1
:
2,3 kg
ENG - 16
Advertisement
Table of Contents
