Cook Timer; Listening To The Fm Radio - Hyundai KR 815 PLLU Instruction Manual

Kitchen radio
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
Snooze
The automatically set alarm function can be switched off for 9 minutes with
the "SNOOZE / DIMMER" button.
Sleep
1) Press the "SLEEP" button to enter.
2) Press the "SLEEP" buttons to set SLEEP time (120, 110, 100 ... 20, 10, OFF)
3) To cancel SLEEP, follow above step 1 to 2 and set the SLEEP time to "OFF".

COOK TIMER

1) Press the "TIME SET / COOK TIMER" button to select cook timer, the longest timer is up to
180 minutes.
2) After setting cook timer, cook timer will automatically operate. When timer countdown fi-
nished, appliance will trigger the alarm.
NOTES:
When press "TIME SET / COOK TIMER" button it will only stays for about 1-2 seconds and then
will go back to normal function.

LISTENING TO THE FM RADIO

1) Select the RADIO mode with the "STANDBY / FUNCTION" button.
2) For FM reception: Completely extend the telescopic antenna. Change its position to improve
the reception.
3) There are two options to search for and preset radio stations.
Automatic scan
Important! Any preset radio stations will be overridden.
Press and hold the „PLAY / PAUSE / AMS / MODE" button for approx.3 seconds. The system
scans the entire frequency band for radio stations. Any stations found will be preset from lowest
to highest frequency.
Manual scan for audio stations
Briefly press the "SKIP +" & "SKIP -" buttons, until you have found the radio station which you
are looking for. If you keep one of the buttons pressed down, the device will search to
the previous, respectively next radio station
Preset station
1) Press and hold the „PLAY / PAUSE / AMS / MODE" button on unit for about 2-3 seconds
to start the automatic preset process.
2) Display will show the memory sequence number and radio stations will be automatically pre-
set into the sequence number (Note: Each sequence number means 1 preset station while
during automatic preset process.)
3) Once all the stations were preset, press the „PRE - / ALARM 1" or „PRE + / ALARM 2"
button to choose your desired station.
EN - 26

Advertisement

Table of Contents
loading

Table of Contents