Installing And Charging The Battery; Installing The Battery - Unitech HT630 Reference Manual

Installing and Charging the Battery

One Lithium-Ion battery is included with the HT630, and the battery must be charged
before the device is ready for use.

Installing the Battery

• Using a coin or screw driver, unlock the battery door
by turning the locking screw in a counterclockwise
direction.
Remove the battery door by lifting it off the HT630.
• Before inserting the Lithium-Ion battery pack into
the HT630, turn the back-up battery switch to the
"On" position.
• Insert the battery so the gold contacts on the battery
line up with the contacts on the HT630. Then slide the
locking tabs on the top of the battery into the open slots
in the HT630 battery compartment.
Once the locking tabs are securely in place, press the
bottom half of the battery into the compartment.
Then reinstall the battery door and tighten the screw
to secure the door in place.
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Back-up Battery
Switch
9