Utransfer - Unitech HT630 Reference Manual

Mobile computer

Hide thumbs Also See for HT630:

Table of Contents

5. The HT630 should BEEP even if it is OFF, PTComm Manager will automatically

turn on the device and connect to it. If there is data in the device, it will be

displayed under the Portable Name. Click and drag the "FORM.dat" file to a

folder within the PC directory (left hand side of the screen).

uTransfer

The uTransfer application is another option for communicating between a Host/PC

and the HT630. uTransfer may be found on the Product CD in the HT630 packaging,

or downloaded from the HT630 Product Page on the Unitech website. uTransfer must

be installed on the PC in order to communicate with the HT630. Once uTransfer is

installed, follow these steps to transfer the data file to the PC:

1. Connect the HT630 to the Host/PC via the communication cable or cradle.

2. Open uTransfer on your PC. Click the "Transfer" button in the uTransfer window

to instantly transfer the data. It will search for a COM port from 1 to 20.

(The files you wish to transfer from the HT630 must be in the default FORM.DAT

format to successfully transfer to the Host/PC)

3. Make sure the HT630 is set to a COM port less than or equal to 20 in the Device

Manager. To get to your Device Manager, go to the PC's Control Panel, select

"System" > "Hardware" > "Device Manager". The COM port will be listed.

4. When uTransfer finishes searching all 20 COM ports, a message will display

below the Transfer button showing you how many files have downloaded to

your PC.

If you have the "Sync Date and Time" option selected, the device will sync the

day and time of the file with the PC.

If you wish to delete the data file on the device after it has been transferred to the

PC, select the "Auto Delete Data" option before clicking Transfer.

5. By default, the file will be downloaded to your desktop with the file name

FORM.DAT. If you have more than one device connected to the computer when

you click Transfer, the second file will be named FORM02.DAT, and the third file

will be FORM03.DAT, etc.

6. You may change the location of the file, as well as the file name and its extension

in the Settings window. Click "Apply" or "OK" to save the changes.

Table of Contents

Show Quick Links

Table of Contents