Serial Ata Connectors - DFI G7B330-B User Manual

2
Hardware Installation

Serial ATA Connectors

1
SATA 0
7
SATA 5 SATA 4
The system board is equipped with 3 Serial ATA connectors for
connecting Serial ATA devices. Connect one end of the Serial ATA
cable to J20 (SATA 5), J19 (SATA 4) or J17 (SATA 0) connector
and the other end to your Serial ATA device.
BIOS Setting
Configure Serial ATA in the Integrated Peripherals submenu
("OnChip IDE Device" section) of the BIOS. Refer to chapter 3 for
more information.
45