DFI G7B330-B User Manual page 62

3
BIOS Setup
CPU Feature
This field is used to configure the CPU that is installed on the sys-
tem board. Move the cursor to this field then press <Enter>.
↑↓
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Delay Prior To Thermal
This field is used to select the time that would force the CPU to a
50% duty cycle when it exceeds its maximum operating temperature
therefore protecting the CPU and the system board from overheat-
ing to ensure a safe computing environment..
Limit CPUID MaxVal
The CPUID instruction of some newer CPUs will return a value
greater than 3. Problems will occur only in certain operating systems.
The default is Disabled because this problem does not exist in the
Windows series operating systems. If you are using an operating
system other than Windows, this problem may occur. To avoid tihs
problem, enable this field to limit the return value to 3 or lesser than
3.
C1E Function
The options are Auto and Disabled.
62
Phoenix - AwardBIOS CMOS Setup Utility
Delay Prior to Thermal
Limit CPUID MaxVal
C1E Function
Execute Disable Bit
Virtualization Technology
Thermal Management
PU/PD/+/-: Change Priority
CPU Feature
16 Min
Disabled
Auto
Enabled
Enabled
Thermal Monitor 1
F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit
F7: Optimized Defaults