DFI G7B330-B User Manual page 80

3
BIOS Setup
USB Mouse Function
Due to the limited space of the BIOS ROM, the support for legacy
USB mouse (in DOS mode) is by default set to Disabled. With
more BIOS ROM space available, it will be able to support more
advanced features as well as provide compatibility to a wide variety
of peripheral devices.
If a PS/2 mouse is not available and you need to use a USB mouse
to install Windows (installation is performed in DOS mode) or run
any program under DOS, set this field to Enabled.
USB Storage Function
This field is used to enable or disable the support for legacy USB
mass storage.
USB Mass Storage Device Boot Setting
Auto Mode
FDD Mode
HDD Mode
80
The system will automatically boot according to
the type detected by USB MSD.
USB MSD will boot as a floppy disk drive.
USB MSD will boot as a hard disk drive.