DFI G7B330-B User Manual page 18

2
Hardware Installation
6. Grasping the module by its edges, position the module above
the socket with the "notch" in the module aligned with the "key"
on the socket. The keying mechanism ensures the module can be
plugged into the socket in only one way.
7. Seat the module vertically, pressing it down firmly until it is com-
pletely seated in the socket.
8. The ejector tabs at the ends of the socket will automatically
snap into the locked position to hold the module in place.
18
Note:
The system board used in the illustrations may not resemble
the actual board. These illustrations are for reference only.