Tray Paper Settings - Toshiba E-studio5530cPRO Operating Instructions Manual

Interleave Print
• Settings made on the main and sub-machines do not affect the connect copy.
Output: Copier
• The main machine applies the setting that has been made on it. Sub-machines also apply their
own respective settings.
Output: Document Server
• The main machine applies the setting that has been made on it. Sub-machines also apply their
own respective settings.
Output: Facsimile
• The main machine applies the setting that has been made on it. Sub-machines also apply their
own respective settings.
Output: Printer
• The main machine applies the setting that has been made on it. Sub-machines also apply their
own respective settings.
ADF Original Table Elevation
• The main machine applies the setting that has been made on it. Sub-machine settings do not
affect connect copy.
System Status/Job List Display Time
• The main machine applies the setting that has been made on it. Sub-machines also apply their
own respective settings.
Time Interval between Printing Jobs
• The main machine applies the setting that has been made on it. Sub-machines also apply their
own respective settings.
Key Repeat
• The main machine applies the setting that has been made on it. Sub-machines also apply their
own respective settings.
Z-fold Position
• The main machine applies the setting that has been made on it. Sub-machines also apply their
own respective settings.
• Make the same settings on both machines.

Tray Paper Settings

The following list describes how the default Tray Paper Settings on the main and sub-machines will be
applied during connect copy.
System Settings on Main and Sub-machines
2
87