Table of Contents
Advertisement
4. Facsimile Features
Program Memory Lock ID
Program a Memory Lock ID to be entered before printing documents when the Memory Lock function
is activated.
1. Press [Facsimile Features].
2. Press [Initial Settings].
3. Press [Program Memory Lock ID].
4. Enter an ID using the number keys, and then press [OK].
A Memory Lock ID can be any four-digit number, except 0000.
4
If you make a mistake, press [Clear] or the [Clear/Stop] key before pressing [OK], and then try
again.
5. Press the [User Tools/Counter] key.
Internet Fax Settings
You can select to display the Internet Fax icon or not. When you want to send an Internet Fax, set On
to display the icon.
The default setting is Off.
Select Dial / Push Phone
Use this function to select a line type when the machine is connected to a G3 analog line.
Dial and Push lines are available for selection.
If the optional extra G3 interface unit is installed, settings for the extra G3 lines appear.
This function is not available in some regions.
The default setting is Push Button Phone.
1. Press [Facsimile Features].
2. Press [Initial Settings].
3. Press [Select Dial / Push Phone].
4. Press [Push Button Phone] or [Dial Phone (10PPS)] to select the line, and then press [OK].
5. Press the [User Tools/Counter] key.
142
Advertisement
Table of Contents
