Table of Contents
Advertisement
4. Facsimile Features
Up to three functions can be programmed to Quick Operation keys.
Functions that appear dimmed have already been set.
The default setting for Quick Operation key 1 has not been set.
The default setting for Quick Operation key 2 is TX File Status.
The default setting for Quick Operation key 3 is RX File Status.
Switch Title
Select the title to be shown on the destination list.
The default setting is Title 1.
Search Destination
4
Select a destination list to be used in "Search Destination".
You can select from the Address Book, or a registered LDAP Server.
To search from an LDAP server, it is necessary to register the LDAP server in [System Settings] and set
[LDAP Search] to [On].
The default setting is Address Book.
For details about "LDAP Search", see "Administrator Tools".
Communication Page Count
Checks the transmission and reception, and totals on the display.
• Pages Sent:
Total number of transmitted pages
• Pages Received:
Total number of received pages
1. Press [Facsimile Features].
2. Press [General Settings].
3. Press [Communication Page Count].
4. After checking the display, press [Exit].
5. Press the [User Tools/Counter] key.
Adjust Sound Volume
Adjust the sound volume during On Hook Mode and Immediate Transmission.
The default setting for sound volume is level 2.
Box Setting
The following functions are for delivery and transfer of documents:
• Personal Box
• Information Box
130
Advertisement
Table of Contents
