Table of Contents
Advertisement
Program Fax Information
Program information to be shown on the display of the other machine and printed as a report. The
following information can be programmed.
• Fax Header
• Own Name
• Own Fax Number
For details about how to program Fax Information, see "Registering Fax Information".
Enable H.323
Specify whether or not H.323 is used for IP-Fax transmission.
The default setting is Off.
Enable SIP
Specify whether or not SIP is used for IP-Fax transmission.
The default setting is Off.
H.323 Settings
Set the IPv4 address or host name, and alias telephone number of the gatekeeper.
If you select [On] using the User Parameters, you can use the gatekeeper server. See "Parameter
Settings" (switch 34, bit 0).
You can use numbers, and symbols ("#" and "*") for registration of the alias telephone number in H.
323 Settings. Make sure you enter these characters correctly.
1. Press [Facsimile Features].
2. Press [Initial Settings].
3. Press [H.323 Settings].
4. Press [Change] for each property.
5. Enter the IPv4 address or host name, and alias telephone number and press [OK].
6. Press [OK].
7. Press the [User Tools/Counter] key.
SIP Settings
Set the SIP server's IPv4 address or host name, and SIP user name.
If you select [On] using the User Parameters, you can use the SIP server. See "Parameter
Settings" (switch 34, bit 1).
You can use alphanumeric symbols (lower and upper cases) and symbols (";", "?", ":", "&", "=", "+",
"$", ",", "-", "_", ".", "!", "~", "*", "#", "'", "(", ")", "%", "/", and "@") for registration of the SIP User
Name in SIP Settings. Make sure you enter these characters correctly.
Use numbers and periods (".") to enter the correct IPv4 addresses for the gatekeeper, SIP server, and
gateway. To obtain the correct IPv4 addresses, consult the administrator.
Initial Settings
4
143
Advertisement
Table of Contents
