Table of Contents
Advertisement
Host Interface
This section describes the user tools in the Host Interface menu under Printer Features.
Default settings are shown in bold type.
I/O Buffer
You can set the size of the I/O Buffer. Normally it is not necessary to change this setting.
The default setting is 128 KB.
I/O Timeout
You can set how many seconds the machine should wait before ending a print job. If data from another
port usually arrives in the middle of a print job, you should increase this timeout period.
The default setting is 15 second (s).
• p.12 "Accessing User Tools"
Host Interface
5
209
Advertisement
Table of Contents
