Table of Contents
Advertisement
7. Registering Addresses and Users for Facsimile/Scanner Functions
To program the SEP Code
This section describes how to program the SEP Code.
1.
Press [Adv. Features], and then press [SEB Code].
2.
Press [Change] under "RX SEP Code".
3.
Enter a SEP Code using the number keys, and then press [OK].
4.
To enter a password, press [Change] under "Password (PWD)".
5.
Enter a password using the number keys, and then press [OK].
6.
Press [OK].
To set the International TX Mode
This section describes how to set the International TX Mode.
1.
Press [Change] under "International TX Mode".
2.
Select [Off] or [On], and then press [OK].
To select the fax header
7
This section describes how to select the fax header.
1.
Press [Change] under "Fax Header".
2.
Select [1st Name] or [2nd Name], and then press [OK].
• p.154 "Registering Fax Information"
To set label insertion
This section describes how to set label insertion.
When Label Insertion is set to ON, the receiver's name and standard messages are printed on the fax
message when it is received at the other end.
1.
Press [Change] under "Label Insertion".
2.
Press [On].
3.
Press [Change] under "Line 2".
4.
Select the new standard message or press [Manual Entry] to enter the new message.
5.
Enter the new message, and then press [OK].
6.
Press [OK].
252
Advertisement
Table of Contents
