Controlling Via The Infrared Remote Control Transmitter; Figure 5: Infrared Remote Control Transmitter; Table 7: Infrared Remote Control Transmitter Functions - Kramer VP-437xl User Manual

7.5 Controlling via the Infrared Remote Control Transmitter

You can control the VP-437xl from the infrared remote control transmitter, as
Figure 5 and Table 7
SIZE
FREEZE BLANK
AV YC
COMP2 PC
XGA Reset 720p
HDMI2
INFO
OK
MENU
Figure 5: Infrared Remote Control
Transmitter
1 OFF in this case means that the outputs and the front-panel are disabled
2 To check if firmware upgrades are available, go to our Web site at
Using the VP-437xl
define:
POWER
MUTE
COMP1
HDMI1
NATIVE
EXIT
Table 7: Infrared Remote Control
Transmitter Functions
Keys
SIZE Set the size of the image displayed
POWER Turn the VP-437xl ON or OFF
FREEZE Freeze/unfreeze the output video
image
BLANK Toggle between a blank screen (blue
or black screen) and the display
MUTE Toggle between muting (blocking out
the sound) and enabling the audio
output
AV Select the composite video input
YC Select the s-Video input
COMP1 Select the component video 1 input
COMP2 Select the component video 2 input
PC Select the UXGA input
HDMI1 Select the HDMI1 input
HDMI2 Select the HDMI2 input
XGA Reset Reset the resolution to XGA
720p Reset Reset the resolution to 720p
INFO Displays the selected input, the input
and output resolutions and the firmware
2
versions on the OSD
NATIVE Select the output resolution via the
EDID of the connected HDMI monitor
Four navigation keys
OK Press to accept changes
Press also to auto adjust the picture
(see section 7.1.1)
MENU Enter the OSD menu
EXIT EXIT the menu
http://www.kramerelectronics.com
Function
1
17