Table of Contents
Advertisement
3
Overview
The Kramer VP-437xl is a high quality presentation switcher and scaler. It
accepts one of seven inputs: a component video
computer graphics on a 15-pin HD connector, composite video on an RCA
connector, s-Video on a 4-pin connector and two HDMI signals. It scales the
video, embeds the audio, and outputs the signal to the HDMI output as well as
to a computer graphics output, an RGBHV video output together with a
digital audio output and an analog stereo audio output.
The VP-437xl is HDTV compatible and the resolution can be up- or down-
scaled as follows:
Native, VGA, SVGA, XGA, SXGA, UXGA, 480i, 480p, 576i, 576p, 720p
2
1080p
, WXGA, WSXGA, WUXGA, 1280x800, 1440x900, 1400x1050
The VP-437xl Presentation Switcher / Scaler:
•
Has analog audio inputs and digital (S/PDIF) and analog stereo audio
outputs
•
Automatically detects and selects the audio source for the HDMI input.
Default selection is HDMI – if this is not present, then the machine uses
the audio from the analog input
•
Comes with an On-Screen Display (OSD) for easy setup and adjustment,
accessible via the IR remote control and via the front-panel buttons
•
Is HDCP Compliant - The HDCP (High Definition Content Protection)
license agreement allows copy-protected data on the HDMI input to pass
only to the HDMI output
•
Has a non-volatile memory that retains the last settings used
•
Supports firmware upgrade
Control your VP-437xl:
•
Directly, via the front panel push buttons
•
By RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
•
Remotely, from the infrared remote control transmitter
•
Via the Ethernet
1 Also known as Y, Pb, Pr, Y, Cb, Cr and YUV; compatible with both SD and HD component
2 At 50Hz and 60Hz
3 To check if firmware upgrades are available, go to our Web site at
Overview
1
3
via RS-232
http://www.kramerelectronics.com
on RCA connectors,
2
2
, 1080i ,
3
Advertisement
Table of Contents
