Table of Contents
Advertisement
Connecting the VP-437xl Presentation Switcher / Scaler
6
Connecting the VP-437xl Presentation Switcher / Scaler
1
To connect
your VP-437xl, as illustrated in the example in
following:
1.
Connect an HDMI source (for example, a DVD player) to the HDMI 1
VIDEO INPUT connector
2.
Connect a computer graphics source to the VGA 15-pin HD VIDEO
INPUT connector.
3.
Connect a composite video source (for example, a composite video
player) to the CV VIDEO INPUT RCA connector.
4.
Connect an s-Video source (for example, an s-Video player) to the YC
4-pin VIDEO INPUT connector.
5.
Connect a component video source (for example, a component video
player) to the COMP 1 P
6.
Connect the audio input signals to the AUDIO IN terminal block
connectors, as required (not shown in
7.
Connect the RGBHV VIDEO OUTPUT BNC connectors to an RGBHV
acceptor (for example, an RGBHV display).
8.
Connect the HDMI VIDEO OUTPUT connector to an HDMI acceptor
(for example, a plasma display).
9.
Connect the VGA VIDEO OUTPUT 15-pin HD connector to a VGA
acceptor (for example, a projector).
10. Connect the audio output signals to the OUT stereo analog audio acceptor
and/or the digital audio acceptor, as required (not shown in
11. Connect the power cord
1 You do not have to connect all the inputs and outputs, connect only those that are required
2 Alternatively, you can connect the DVI connector on the DVD player to the HDMI connector on the VP-437xl via a
DVI-HDMI adapter. When using this adapter, you can connect the audio signal via the terminal block connector
3 We recommend that you use only the power cord that is supplied with this machine
10
2
.
, P
and Y, VIDEO INPUT RCA connectors.
R
B
Figure
3
(not shown in
Figure 2
Figure 2
2).
).
KRAMER: SIMPLE CREATIVE TECHNOLOGY
, do the
Figure
2).
Advertisement
Table of Contents
