Fixture Test - Martin RUSH MH 1 Profile User Manual

Automatically turn off display backlight
By default the display is lit when the power is applied to the fixture. It can be
set to automatically dim if the buttons and menus have not been used for a
period:
1. Select DISPLAY SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select BACKLIGHT AUTO OFF and
press ENTER to confirm.
3. Use the DOWN and UP buttons to select YES (auto off) or NO (constant
backlight).
4. Press ENTER to confirm (or press MENU to exit without saving any
changes).
Adjust backlight brightness
The brightness of the control panel display can be adjusted:
1. Select DISPLAY SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select BACKLIGHT BRIGHTNESS and
press ENTER to confirm.
3. Use the DOWN and UP buttons to select a level from 1 to 10.
4. Press ENTER to confirm (or press MENU to exit without saving any
changes).

Fixture test

Automatic tests of all functions or manual test of individual functions can be
run from the control menus.
Auto test
To perform a complete test of all of the fixture functions:
1. Select FIXTURE TEST and press ENTER to confirm.
2. Use the DOWN and UP buttons to select AUTO TEST and press ENTER
to confirm. The automatic test will run.
3. Press MENU to exit.
Manual test
Fixture functions can be tested or controlled manually:
1. Select FIXTURE TEST and press ENTER to confirm.
2. Use the DOWN and UP buttons to select MANUAL TEST and press
ENTER to confirm.
3. Press MENU to exit.
20 RUSH MH 1 Profile User Manual