Furuno CI-68 Installation Manual page 4

SAFETY INSTRUCTIONS
CAUTION CAUTION
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or damage the equipment.
Do not install the transducer where
noise or air bubbles is present.
Performance will be affected.
Do not allow warm water or any other
liquid other than seawater or fresh-
water to contact the transducer.
Damage to the transducer may result.
Power on the transducer in the water.
ii
CAUTION CAUTION
The transducer cable must be handled
carefully, following the guidelines
below. Keep fuels and oils away from
the cable. Locate the cable where it
will not be damaged.
Ground the equipment to prevent
electrical shock and mutual
interference.
Observe the following compass safe
distances to prevent intereference to a
magnetic compass:
Standard
compass
2.00m
Transceiver unit
0.30m
Control unit
Monitor unit 0.80m
Steering
compass
1.30m
0.30m
0.55m