Furuno CI-68 Installation Manual page 25

7. Fix the transducer to the fixing flange.
Fixing plate
Transducer
8. Pass the transducer cable through the thru-hull pipe. Tighten the cable gland,
leaving 0.5 to 1.0 m of slack in the cable below the cable gland.
To tighten the cable gland
1) Tighten the gland securely by using the wrench.
2) Tighten the double nut securely.
9. Fix the fixing flange with the transducer to the casing. Take care not to pinch the
transducer cable.
Transducer and fixing flange
Thru-hull pipe, side view
Dimple to bow
Gland
Flat washer
Rubber gasket
Flat washer
Double nut for gland
Double nut for gland
Lock nut
Washer
Gasket
Hull bottom
Thru-hull pipe
2. MOUNTING
2-11