Furuno CI-68 Installation Manual page 16

2. MOUNTING
2. Mounting the monitor unit together with the control unit
Fasten the hanger at the rear of the monitor unit with four binding screws (M4x10).
Mounting the monitor unit separately from the control unit
1) Dismount the coupling plate from the rear of the monitor unit to separate the
monitor unit from control unit.
2) Attach the hanger at the rear of the monitor unit with four binding screws
(M4x10).
3. Grease threads of upset screws (M6x16, 2 pcs.) used to fasten the hanger to the
mounting base.
4. Attach the waterproofing cap (MJ-A10C, supplied as the installation materials) to
the CONT port at the back of the monitor unit.
2-2
1 2
3
4
CONT port
Hanger (landscape-type)
1
2
4
3
CONT port
Monitor unit, rear view
Bracket (rear view)
2
1
3
4
Bracket (rear view)
1 2
4
3