Safety Instructions - Furuno CI-68 Installation Manual

SAFETY INSTRUCTIONS

Read these safety instructions before you operate the equipment.
WARNING
CAUTION
Warning, Caution
WARNING
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Do not install the display unit or
transceiver unit where it may get
wet from rain or water splash.
in the equipment can result in
Water
fire, electrical shock or damage the
equipment.
Do not open the cover unless totally
familiar with electrical circuits and
service manual.
High voltage exists inside the
equipment, and a residual charge
remains in capacitors several minutes
after the power is turned off. Improper
handling can result in electrical shock.
The transceiver unit weights 17 kg.
Reinforce the mounting area, if
necessary.
Indicates a condition that can cause death or serious
injury if not avoided.
Indicates a condition that can cause minor or moderate
injury if not avoided.
Prohibitive Action
Mandatory Action
WARNING
Install the specified transducer tank in
accordance with the installation instru-
ctions. If a different tank is to be
installed the shipyard is solely respon-
sible for its installation, and it should
be installed so the tank doesn't strike
an object.
The tank or hull may be damaged if the
tank strikes an object.
The mounting location must be away
from rain and water splash.
Use the proper fuse.
Use of a wrong fuse can result in
damage to the equipment or cause fire.
i