Connecting And Operating The Hdmi Detective Plus - Gefen EXT-HDMI-EDIDP User Manual

CONNECTING AND OPERATING THE HDMI DETECTIVE PLUS

5. Once a successful EDID record is complete, remove the 5V DC power supply
from the HDMI Detective Plus. At this time, it is recommended that you write
protect the HDMI Detective Plus to prevent an accidental overwrite. Please see
page 9 for instructions on this procedure.
6. If HDCP is required by the source, the display must also be HDCP compliant
and DIP SWITCH 4 will have to be enabled for HDCP pass through to function.
Please refer to your source and display manuals for HDCP compatibility and
enable DIP SWITCH 4 appropriately.
7. The source should be powered off when connecting it to the HDMI In port on
the HDMI Detective Plus.
8. Power on the source.
Note: If using a PC, restart your computer only after you've made all the
connections.
5