Using A Pre-Programmed Edid - Gefen EXT-HDMI-EDIDP User Manual

EDID Resolutions - Aspect Ratio
720 x 480p 16:9
4 1280 x 720p 16:9
1920 x 1080i 16:9 (native)
720 x 480p 16:9
5 1280 x 720p 16:9
1920 x 1080p 16:9 (native)
1. Choose the desired EDID from the table above and enable the corresponding
DIP SWITCHES.
2. Follow steps 3 through 8 in the section CONNECTING AND OPERATING THE
HDMI DETECTIVE PLUS (Page 4 and 5)
NOTE: Only when the DIP SWITCHES are set in the combinations above will an
pre-programmed EDID be written to the HDMI Detective Plus. Please set all DIP
SWITCHES to the OFF position to enable the default setting and record an EDID
from an attached display.

USING A PRE-PROGRAMMED EDID

1440 x 480p 16:9
1920 x 1080p 16:9
1440 x 480p 16:9
1920 x 1080i 16:9
Refresh Rate Audio
Linear PCM 8
59.94/60 hz
Channel
Linear PCM 2
Linear PCM 8
59.94/60 hz
Linear DTS
Linear AC-3
7
Setting DIP SWITCHES
1 2 3 4
OFF OFF ON N/A
1 2 3 4
ON OFF ON N/A