Table of Contents
Advertisement
CONNECTING AND OPERATING THE 3GSDI TO HDMI 1.3 SCALER
1.
Connect the SD/HD/3G-SDI source(s) to the SDI input(s) on the Scaler. If using a
dual-link SDI source, ensure that both SDI inputs 1 and 2 are connected. If SDI source
monitoring is desired, connect an SDI output device on the SDI loop output.
2.
SDI audio may be monitored on digital audio equipment by connecting amplifi cation/
output devices to the S/PDIF output on the Scaler.
3.
Connect an HDMI-compliant output device to the HDMI output port on the 3GSDI
to HDMI 1.3 Scaler. Connect the included 5V DC power supply's locking power
connector to the Scaler, then connect the AC adaptor to an available wall socket.
4.
Operation of the Scaler is done by the included IR Remote Control. The remote
control has directional buttons to navigate within the On-Screen Display (OSD) menu
system that drives the Scaler. The MENU button brings up the OSD and the OK button
confi rms a choice or selection.
Be sure you have read the contents of page 7, "EXT-RMT-8HDS-IR Remote
Description" to familiarize yourself with the IR remote control supplied with the Scaler.
5.
Power up the Scaler. The Power LED indicator will turn red. Press the MENU button
on the included IR Remote to activate the OSD (Use the OK button when confi rming a
choice or making selections). Use the IR remote to access the input menu, then select
the link confi guration type (single or dual link). The OSD will indicate the input format.
By default the Scaler will choose an optimum output resolution. An alternate resolution
may be selected from the output menu. In about 30 seconds, the Gefen logo will
appear on the HDMI output device, then the SDI source signal will be displayed.
Wiring Diagram for the Gefen 3GSDI to HDMI 1.3 Scaler
Setting up the Scaler for the First Time
3GSDI Source
Audio Receiver
ANALOG AUDIO (RCA) CABLE
3G-SDI CABLE
HDMI CABLE
Sc
Scaler
EXT-3GSDI-2-HDMI1.3S
6
HDMI Display
Advertisement
Table of Contents
