Introduction / Operation Notes Features Panel Layout Operation Controls and Functions Operation Controls and Functions Operation Controls and Functions / Color Settings Output Settings / OSD Adjustment / Information Using the HD Mate Scaler RMT-SR-IR Installation Pin Configuration Specifications Terminology Warranty TABLE OF CONTENTS...
The HD Mate Scaler switches two Component sources and one DVI source, all with digital TOSlink and analog audio inputs. The Gefen HD Mate Scaler allows you to upscale and switch your standard definition or high definition component sources to resolutions up to 1080p. Anything from set-top boxes, DVD players to the next generation of gaming consoles including the Xbox 360 and PS3 can be plugged into the HD Mate Scaler.
Features • Both digital and analog inputs are format converted and pixel re-scaled through the HD Mate Scaler. It outputs a large range of formats and resolutions that will easily match the native resolution/ format of your display to ensure highest picture quality. •...
OPERATION CONTROLS AND FUNCTIONS The HD Mate accepts two component and one DVI inputs with audio inputs on each. The formats supported by these inputs are as follows: COMPONENT YPbPr YCbCr PC INPUT: RGBHV VGA/SVGA/XGA/SXGA/UXGA/WXGA/WSXGA/WUXGA DVI INPUT: Digital XGA @ (60/70/75/85)/SXGA @ (60/75/85)/UXGA @ 60/ When connecting to a VGA PC source use a 15-pin D-sub cable to connect the output of a PC to the DVI-I input connector of the HD Mate via a VGA to DVI.
OPERATION CONTROLS AND FUNCTIONS After you power on the unit, press the menu button and it will bring up the main menu as follows: Video (or PC): When Video is selected, a sub menu as shown below, will come up.
OPERATION CONTROLS AND FUNCTIONS Picture mode: There are four picture modes for customers to choose from. User: Select to adjust to your favorite setting and store it. Standard: Standard factory default setting for optimal display in a normal environment. Vivid: High saturation picture for optimal display in a bright room. Movie: Picture for comfortable low brightness display in a dark room.
Page 10
Output: The HD Mate can output a wide variety of PC and HD resolutions as follows. VGA (up to 100MH) DVI/HDMI (up to 165 MH) 480i 480p 576i 576p 720p @ (50/60) 720p @ (50/60) 1080i @ (25/30) 1080i @ (25/30) 1080p @ (50/60) 1080p @ (50/60) VGA @ 60...
Connect all the sources to the DVI and/or Component Inputs to the HD Mate. Connect the HDMI/DVI/VGA display to the DVI output, with the proper cable and/or adapter, on the HD Mate. Connect the 5VDC power supply to the HD Mate Controlling the HD Mate using the RMT-SR-IR: By Pressing ...
RMT-SR-IR INSTALLATION 1. Remove battery cover from the back of the RMT-SR-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down.
DVI-I Input Pin Assignment DVI-Digital(DVI-D): Supports digital-only connections between the host computer and display. This interface is designed for a 12 or 24-pin connections to enable single or dual-link mod activation. Signal Assignment T.M.D.S. Data 2 - T.M.D.S. Data 2 + T.M.D.S.
SPECIFICATIONS Digital Video Amplifier Bandwidth...1.65 Gbps Component Video Bandwidth...350 Mhz Input DDC Signal...5 volts p-p (TTL) Input Video Signal...1.2 volts p-p Single Link Range...1080p/1920 x 1200 Input/Output DVI Connector...DVI-I (29 pin) female Component Video Connector...3 RCA Digital Audio Connector...Optical TOSlink Analog Audio Connector...mini-phone stereo 3.5mm Power Supply...5V DC Power Consumption...12 watts (max)