1.
External EDID
Move the EDID switch to the Ext position to use the EDID in the display.
Connect the source and display to the VGA to DVI Converter, then power
on the unit.
2.
Internal EDID
Move the EDID switch to the Int position to use the Internal EDID. Use this
EDID if the display does not contain or has an invalid EDID. Connect the
source and display to the VGA to DVI Converter, then power on the unit.
See page 8 for a list of resolutions and timings supported by the Internal
EDID.
EDID MANAGEMENT
EDID Modes
7
EDID switch set to
External EDID
EDID switch set to
Internal EDID