Attach Top Beam Plates (#13) and One 3 ½" Pulley (#37) to Upper Main Frame (#10) using:
Attach Lat Bar Holders (#50) and One 3 ½" Pulley (#37) to Top Beam Plates (#13) Using:
Finger tighten bolts only. No not wrench tighten until after step 9.
10
Four (M10*100 Hex Bolts)
Two (1" Long barrel Spacers)
Finger Tighten Only
One (M10*115 Hex Bolt)
One (M10*100 Hex Bolt)
One (3" Spacer Tube)
Two (1" Long barrel Spacers)
Page 11
STEP 8
12/11