Technical Information - Chauvet Q-Wash™ 419Z-LED User Manual

PERSON5 (cont.)

5. Technical Information

Product
Maintenance
Channel Function
19 Red 2
20 Red 2 Fine
21 Green 2
22 Green 2 Fine
23 Blue 2
24 Blue 2 Fine
25 White 2
26 White 2 Fine
27 Red 3
28 Red 3 Fine
29 Green 3
30 Green 3 Fine
31 Blue 3
32 Blue 3 Fine
33 White 3
34 White 3 Fine
To maintain optimum performance and minimize wear, you should clean this
product frequently. Usage and environment are contributing factors in
determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light
output performance and can cause overheating. This can lead to reduced light
source life and increased mechanical wear.
To clean your product:
Unplug the product from power.
Wait until the product is at room temperature.
Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external vents and accessible internal components.
Clean all external surfaces with a mild solution of non-ammonia glass
cleaner or isopropyl alcohol.
Apply the solution directly to a soft, lint-free cotton cloth or a lens
cleaning tissue.
Wipe any dirt or grime to the outside edges of the lens surface.
Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Value Percent/Setting
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%