Memory Operation Menu - Printronix L5535 Maintenance Manual

Appendix D

Memory Operation Menu

Memory Operation Menu
The memory operation menu, shown in Figure II–58, allows you to display
and change printer NVRAM values on the MC board.
To select a memory operation item, scroll through the menus until the target
item appears at the extreme left of the message display, and press the ↓ key.
When "STD. SETTING" is selected from the item menu, the data will be
written for all items (setting all values at once).
NOTE: For NVRAM values, see the inspection sheet located inside the
MEMORY
OPERATION
FANFOLD FANFOLD
PAPER XO PAPER YO
FORM STROBE
LENGTH LENGTH
DEVELOPMENT STD.
BIAS SETTING
II–342
printer. If there is no inspection sheet, locate the serial number of the
printer and contact Printronix Technical Support for the factory-set
value.
CUT SHEET CUT SHEET
XO
CORRECTION WAST T.
STROBE JUDGMENT
ERROR ADR.
ERROR ADDRESS
ADDRESS=00000000
Figure II–58. Memory Operation Menu
CORRECTION
YO
X
TONER
MONITOR CYC.
Press ↑ , ↓ , → , and ← to view options.
Press ENTER to select an option.
Press number keys to enter a value.
Press START/STOP to start and stop tests.
CORRECTION
Y
SURFACE
POTENTIAL