AMX TPI-PRO-2 Operation/Reference Manual page 99

"^" Button Commands (Cont.)
^BMF
(Cont.)
TPI-PRO Total Presentation Interface - Pro Edition
For some of these commands and values, refer to the RGB Values for all 88 Basic
Colors table on page 81.
'%CF<on fill color>' = Set Fill Color.
'%CB<on border color>' = Set Border Color.
'%CT<on text color>' = Set Text Color.
'%SW<1 or 0>' = Show/hide a button.
'%ST<style>' = Button style.
'%SO<sound>' = Set the button sound.
'%EN<1 or 0>' = Enable/disable a button.
'%WW<1 or 0>' = Word wrap On/Off.
'%GH<bargraph hi>' = Set the bargraph upper limit.
'%GL<bargraph low>' = Set the bargraph lower limit.
'%GN<bargraph slider name>' = Set the bargraph slider name/Joystick cursor name.
'%GC<bargraph slider color>' = Set the bargraph slider color/Joystick cursor color.
'%GI<bargraph invert>' = Set the bargraph invert/noninvert or joystick coordinate
(0,1,2,3). See the ^GIV section on page 100 more information.
'%GU<bargraph ramp up>' = Set the bargraph ramp up time in intervals of 1/10 second.
'%GD<bargraph ramp down>' = Set the bargraph ramp down time in 1/10 second.
'%GG<bargraph drag increment> = Set the bargraph drag increment. Refer to the ^GDI
command on page 100 for more information.
'%VI<video on/off>' = Set the Video either On (value=1) or Off (value=0).
'%OT<feedback type>' = Set the Feedback (Output) Type to one of the following: None,
Channel,Invert, On (AlwaysOn), Momentary, or Blink.
'%SM' = Submit a text for text area button.
'%SF<1 or 0>' = Set the focus for text area button.
'%OP<0-255>' = Set the button opacity to either Invisible (value=0) or Opaque
(value=255).
'%OP#<00-FF>' = Set the button opacity to either Invisible (value=00) or Opaque
(value=FF).
'%UN<Unicode text>' = Set the Unicode text. See the ^UNI section on page 105 for the
text format.
'%LN<0-240>' = Set the lines of video being removed. See the ^BLN section on page 90
for more information.
'%EF<text effect name>' = Set the text effect.
'%EC<text effect color>' = Set the text effect color.
'%ML<max length>' = Set the maximum length of a text area.
'%MK<input mask>' = Set the input mask of a text area.
'%VL<0-1>' = Log-On/Log-Off the computer control connection
'%VN<network name>' = Set network connection name.
'%VP<password>' = Set the network connection password.
Example:
SEND_COMMAND Panel,"'^BMF-500,1,%B10%CFRed%CB Blue
%CTBlack%Ptest.png'"
Sets the button OFF state as well as the Border, Fill Color, Border Color, Text Color, and
Bitmap.
Programming
93