AMX TPI-PRO-2 Operation/Reference Manual page 35

6. Press the Protected Setup button (located on the lower-left of the panel page) to open the Protected
Setup page.
7. Enter 1988 into the Keypad's password field and press Done when finished.
8. Press the on-screen Reboot button to cycle power to the TPI-PRO and incorporate the new settings.
The touch monitor goes blank for a few seconds during the reboot process. You can also use a
mouse to press the on-screen Reboot button.
9. Upon start-up, press anywhere on the screen to return to the Protected Setup page and begin
defining the communication properties.
TPI-PRO Total Presentation Interface - Pro Edition
TPI-PRO and Panel Interface Setup
29