AMX TPI-PRO-2 Operation/Reference Manual page 11

TPI-PRO Specifications (Cont.)
Serial Touch Drivers:
USB Drivers:
Button Assignments:
Communication/
Programming:
Enclosure:
Operating/Storage
Environment:
Dimensions (HWD):
Weight:
Certifications:
Included Accessories:
TPI-PRO Total Presentation Interface - Pro Edition
For an updated list of available serial touch input drivers that are selectable by
using the TOUCH button on the front panel of the TPI-PRO, visit
www.amx.com. Refer to the List of Available Pixel Display and Refresh
Rates section on page 140 for a more detailed list of Touch Monitors that have
been tested with the TPI-Pro.
USB Touch drivers are automatically loaded when the USB Touch Monitor is
detected. Refer to www.amx.com for latest list of supported USB touch
drivers.
Button assignments can be modified in TPD4 (not on the TPI-PROs.)
• Button channel range: 1 - 4000 button push and feedback (per address port)
• Button variable text range: 1 - 4000 (per address port)
• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)
• Level range: 1 - 600 (Default level value 0-255, can be set up to 1-65535)
• Address port range: 1 - 100
Master communication and programming is available via an Ethernet
connection. Refer to the Step 3: Configuring the Ethernet Connection
Type section on page 34 for more information.
There are several methods of TPI-PRO communication and programming
available:
• DHCP - Refer to the IP Settings section - Configuring a DHCP Address over
Ethernet section on page 33 for more information.
• Static IP - Refer to the IP Settings section - Configuring a Static IP Address
over Ethernet section on page 33 for more information.
• URL - Refer to the Master Connection section - NetLinx Master Ethernet IP
Address - URL Mode section on page 35 for more information.
• Listen - Refer to the Master Connection section - NetLinx Master Ethernet IP
Address - Listen Mode section on page 36 for more information.
• Auto - Refer to the Master Connection section - NetLinx Master Ethernet IP
Address - Auto Mode section on page 37 for more information.
• NPD (UPD - Refer to the Master Connection section - NetLinx Master
Ethernet IP Address - NDP (UDP) Mode section on page 37 for more
information.
• URL (UPD) - Refer to the Master Connection section - NetLinx Master
Ethernet IP Address - URL (UDP) Mode section on page 38 for more
information.
Metal with black matte finish
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 5% to 85% RH Non-Condensing
• Storage Temperature: -10° C (14° F) to 70° C (158° F)
• Storage Humidity: 0% to 85% RH Non-Condensing
• 2.24" x 17.00" x 10.27"
• 5.69 cm x 43.18 cm x 26.09 cm
8.25 lbs (3.74 kg)
• FCC (Class B)
• CE
• IEC60950
• 2-pin PWR connector (41-5025)
• Assembly Kit (Four-#10-32 screws and Four-#10 washers) (KA0001)
• Rack Ear brackets for shelf, wall, and under-table mounting (60-0900-03)
• TPI-PRO Quick Start Guide (93-2275-101)
• NXA-USBTN, TakeNote USB Computer Control Stick (FG070-603)
Overview
5