Checking Network Configuration; Selecting The Network Type - Samsung SNP-6321H Network Setup Manual

checking network configuration

Configure the network after checking the following.
1. Check whether to use a DDNS server.
- Check whether to use a DDNS for remote monitoring from outside, or to configure the system in the form of
a local network for monitoring only inside the local network.
2. Check whether to use a static IP or dynamic IP.
3. Before installation, check the number and locations of network cameras and the location of the monitoring PC.
4. Check the network devices to be connected to a network camera, such as IP router/hub.
5. Check the port forwarding, ports and protocol required for establishing a camera connection path.

SELECTING THE NETWORK TYPE

Select the type of network that you want to configure based on the following information.
If DDNS server is not used:
As shown in the image below, if the monitoring PC and network camera are connected to the same router, they
will have the same IP range.
Install the IP installer on the local monitoring PC and use the PC for IP configuration.
EX1)
Local monitoring PC
EX2)
Local monitoring PC
WAN
Modem
Router
...
Network camera1 Network camera n
WAN
Modem
Router
...
Network camera 1 Network camera n Hub
...
Network camera 1 Network camera n
English _3