Selecting An Aspect Ratio - Christie LW401 Manual

LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Operating

Selecting an aspect ratio

1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches
the mode for aspect ratio in turn.
 For a computer signal
LX501, LX601i:
NORMAL  4:3  16:9  16:10
LW401, LW551i, LWU421, LWU501i:
NORMAL  4:3  16:9  16:10  NATIVE
 For an HDMI
LX501, LX601i:
NORMAL  4:3  16:9  16:10  14:9
LW401, LW551i, LWU421, LWU501i:
NORMAL  4:3  16:9  16:10  14:9  NATIVE
 For a video signal, s-video signal or component video signal
LX501, LX601i:
4:3  16:9  14:9
LW401, LW551i, LWU421, LWU501i:
4:3  16:9  16:10  14:9  NATIVE
 For an input signal from the LAN, USB TYPE A or USB TYPE B ports, or
if there is no signal
LX501, LX601i, : 4:3 (fixed)
LW401, LW551i, LWU421, LWU501i: 16:10 (fixed)
NOTE
• ASPECT button does not work when no proper signal is inputted.
• NORMAL mode keeps the original aspect ratio setting.
Operating Guide
signal
TM
28
ASPECT
button
020-000461-02 Rev. 1 (06-2012)