Christie LW401 Manual page 89

Item
PRESENTATION
(continued)
SERVICE
Operating Guide
• To change from Single PC
mode to Multi PC mode, press
► button to choose OK in the
dialog and press the ENTER or
INPUT button.
The display mode is changed.
• For details on how to switch the display mode to Multi
MULTI PC
PC mode on your computer, refer to the manual for
MODE
"LiveViwer".
(continued)
• The Presenter mode setting of the selected
computer becomes valid when the display mode is
changed to Single PC mode.
Also, the Presenter mode setting becomes invalid
when the display mode is changed to Multi PC mode,
regardless the setting on the computers.
For details, refer to the manual for "LiveViewer".
Selecting this item displays the user name. This
function helps you identify from which computer the
DISPLAY current image is sent.
USER NAME
• You can set a user name for each computer on
"LiveViwer". For details, refer to the manual for
"LiveViewer".
Executing this item restarts and initializes the network functions.
Choose the NETWORK RESTART EXECUTE using the button ►.
Then use the button ► to execute.
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting NETWORK RESTART EXECUTE, NETWORK menu
may not be controlled approx. 30 seconds.
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Description
87
SECURITY menu
020-000461-02 Rev. 1 (06-2012)