Christie LW401 Manual page 13

Connecting with your devices (continued)
NOTE
• Before connecting the projector to a computer, consult the computer's
manual and check the compatibility of the signal level, the synchronization methods
and the display resolution output to the projector.
- Some signal may need an adapter to input this projector.
- Some computers have multiple screen display modes that may include some
signals which are not supported by this projector.
- Although the projector can display signals with a resolution up to UXGA
(1600x1200) or up to W-UXGA (1920x1200) for LWU421 and LWU501i, the signal
will be converted to the projector's panel resolution before being displayed. The
best display performance will be achieved if the resolutions of the input signal and
the projector panel are identical.
• If you connect this projector and a notebook computer, you need output the
display to an external monitor, or output simultaneously to the internal display and
an external monitor. Consult the computer's manual for the setting.
• Depending on the input signal, the automatic adjustment function of this projector
may take some time and not function correctly.
- Note that a composite sync signal or sync-on-green signal may confuse the
automatic adjustment function of this projector (53).
- If the automatic adjustment function does not work correctly, you may not see the
dialog to set the display resolution. In such a case, use an external display device.
You may be able to see the dialog and set an appropriate display resolution.
(continued on next page)
Operating Guide
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
(27)
(27, 105)
(58) (27)
11
Setting up
Computer
020-000461-02 Rev. 1 (06-2012)