Christie LW401 Manual page 59

Item
STANDBY MODE
MONITOR OUT
Operating Guide
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL ó SAVING
When SAVING is selected, the power consumption in the standby
mode is lowered with some functional restriction as below:
• When SAVING is selected, the RS-232C communication control
except to turn the projector on and the network function are disabled
while the projector is in the standby mode. If the COMMUNICATION
TYPE in the COMMUNICATION menu is set to NETWORK
BRIDGE, all of the RS-232C commands are disabled (73).
• When SAVING is selected, AUDIO OUT STANDBY setting of
AUDIO SOURCE (58) is invalid, and no signal is output from
AUDIO OUT port in the standby mode.
• When SAVING is selected, STANDBY setting of MONITOR OUT
is invalid, and no signal is output from MONITOR OUT port in the
standby mode.
• When SAVING is selected, the CENTERING feature while the
projector is in the standby mode is disabled.
• <Only for LX601i, LW551i and LWU501i> When SAVING is
selected, the Status Monitor and its button operation are unavailable
while the projector is in the standby mode.
While the image signal from the input
port chosen in step (1) is projected, the
image signal from the input port selected
in step (2) is output to MONITOR OUT
port.
(1) Choose a picture input port using
▲/▼ buttons.
Choose STANDBY to select the
picture output in the standby mode.
(2) Select one of the COMPUTER IN
ports using ◄/► buttons.
Select OFF to disable the MONITOR
OUT port for the input port or standby
mode chosen in the step (1).
• <Only for LX501 and LX601i> You
cannot select COMPUTER IN1 in step (1)
and COMPUTER IN2 in step (2) and vice
versa.
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Description
57
SETUP menu
LX501, LX601i
LW401, LW551i,
LWU421, LWU501i
020-000461-02 Rev. 1 (06-2012)