Connecting with your devices (continued)
NOTE
• The HDMI ports of this model are compatible with HDCP (High-band-
width Digital Content Protection) and therefore capable of displaying video
signals from HDCP compatible DVD players or the like.
- The HDMI ports support the following signals:
Video signal : 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60,
1080i@50/60, 1080p@50/60
Audio signal : Format Linear PCM
Sampling frequency 48kHz / 44.1kHz / 32kHz
- This projector can be connected with another equipment that has HDMI
connector, but with some equipment the projector may not work properly,
something like no video.
- Be sure to use an HDMI
- Use a Category 2-certified HDMI
projector.
- When the projector is connected with a device having DVI connector, use a
DVI to HDMI
TM
• The HDMI
cables might come off easily due to the lack of a mechanical lock
TM
on the cables and connectors. It is recommended to fasten the cables to the
projector to prevent the cables from coming off (15, 16).
(continued on next page)
Operating Guide
(58)
(27)
cable that has the HDMI
TM
cable to connect with the HDMI
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
(27, 53)
(27)
cable to input 1080p@50/60 signal to the
TM
input (Setup Guide).
TM
13
Setting up
VCR/DVD/
Blu-ray Disc
player
logo.
TM
020-000461-02 Rev. 1 (06-2012)
TM
TM