Selecting an aspect ratio
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches
the mode for aspect ratio in sequence.
For a computer signal
NORMAL 4:3 16:9 16:10 ZOOM NATIVE
For HDMI
TM
, HDBaseT
NORMAL 4:3 16:9 16:10 14:9 ZOOM NATIVE
For a video signal or component video signal
4:3 16:9 16:10 14:9 ZOOM NATIVE
For an SDI signal (LWU900-DS/LHD878-DS only)
LWU900-DS : NORMAL 4:3 16:9 16:10 ZOOM NATIVE
LHD878-DS : NORMAL 4:3 16:9 ZOOM NATIVE
For an input signal from the LAN port, or if there is no signal
LWU900-DS/LWU755-DS: 16:10 (fixed)
LHD878-DS: 16:9 (fixed)
NOTE
• The ASPECT button does not work when no proper signal is input.
• NORMAL mode keeps the original aspect ratio setting.
• You cannot select NATIVE when inputting 4K signal.
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Operating Guide
TM
, and DisplayPort
35
NETWORK INTERACTIVE
INFO
TM
signals
Operating
ASPECT
button
020-001587-01 Rev. 1 (12-2018)
LIT MAN USR DS Series