Christie LW401 Manual page 76

LX501/LX601i/LW401/LW551i/LWU421/LWU501i
OPTION menu
Item
SERVICE
(continued)
(continued on next page)
Operating Guide
SERIAL SETTINGS
Select the serial communication condition for the
CONTROL port.
BAUD RATE
• The BAUD RATE is fixed to 19200bps and PARITY
is fixed NONE when the COMMUNICATION TYPE
is set to OFF (73).
COMMUNICATION
TRANSMISSION METHOD
(continued)
Select the transmission method for communication by
the NETWORK BRIDGE from the CONTROL port.
HALF-DUPLEX: This method lets the projector
FULL-DUPLEX: This method lets the projector
• HALF-DUPLEX is selected as the default setting.
• If you select HALF-DUPLEX, check the setting of
the item RESPONSE LIMIT TIME (75).
Description
4800bps ó 9600bps ó 19200bps ó 38400bps
PARITY
NONE ó ODD ó EVEN
HALF-DUPLEX ó FULL-DUPLEX
make two way communication, but only one
direction, either transmitting or receiving data, is
allowed at a time.
make two way communication, transmitting and
receiving data at the same time.
74
020-000461-02 Rev. 1 (06-2012)