Page: 19
Service Guide OKIPAGE 10e
Chapter 2 Operation
2.5 Cover Open
When the stacker cover is opened, the cover open microswitch on the power supply/sensor board is turned off to cut +5V
supply to the high voltage power supply circuit. This results in the interruption of all high-voltage outputs. At the same
time, the CVOPN signal is sent to the main control board to notify that the microswitch is off, and the main control board
carries out the cover open process.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)