Status Message Troubleshooting - Oki OKIPAGE 10e Service Manual

6.5.2 Status Message Troubleshooting

If the problems cannot be corrected by using the LCD status message/problem list, follow the troubleshooting flowcharts
given here to deal with them.
No. Trouble
1. The printer does not work normally after the power
is turned on.
2. Jam alarm
Paper input jam
l
Paper feed jam
l
Paper exit jam
l
3. Paper size error
4. Fusing unit error
5. SSIO (Synchronous Serial Input/Output) error I/F timeout (no
response) between the printer and an optional tray (High Capacity
Second Paper Feeder, Power Envelope Feeder).
6. Fan error
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIPAGE 10e
Chapter 6 Troubleshooting
Flowchart number
Page: 71
(1)
(2) - 1
(2) - 2
(2) - 3
(3)
(4)
(5)
(6)