Page: 34
Service Guide OKIPAGE 10e
Chapter 3 Disassembly
3.3.9 Eject Roller Assy
(1) Remove the upper cover assy (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the lower base unit (see 3.3.5).
(5) Disengage the eject roller assy (1) from the lower base (2) by pressing the latch section of the eject roller assy (1) in
the direction of the arrow shown below, and remove the eject roller assy (1).
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved.
(BPX) for any updates to this material. (
)