How To Change Parts - Oki OKIPAGE 10e Service Manual

Page: 25
Service Guide OKIPAGE 10e
Chapter 3 Disassembly

3.3 How to Change Parts

This section explains how to change parts and assemblies listed in the disassembly diagram below.
3.3.1 Upper cover
3.3.2 IC Card Cover
3.3.3 LED head
3.3.4 Operator Panel Assy
3.3.5 Lower Base Unit
3.3.6 Pulse Motor (Main/Drum)
3.3.7 Pulse Motor (Registration)
3.3.8 Face Up Stacker Assy
3.3.9 Eject Roller Assy
3.3.10 Motor Assy
3.3.11 Hopping Roller Shaft Assy
3.3.12 Stacker Cover Assy
3.3.13 Registration Roller
3.3.14 Back-up roller
3.3.15 Sensor plate (inlet)
3.3.16 Toner sensor
3.3.17 Sensor plate (outlet)
3.3.18 Manual feed guide assy
3.3.19 Sensor plate (Paper supply)
3.3.20 Main control PCB
3.3.21 Power supply board and contact assy
3.3.22 Transformer
3.3.23 Power supply/sensor board and contact assy
3.3.24 Cassette guide (L)
3.3.25 Cassette guide (R)
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)